----- Original Message ----- From: "Clay Archer" <[EMAIL PROTECTED]>
To: "KXT Help List" <kxt@kxthelp.com>
Sent: Saturday, January 01, 2005 2:58 PM
Subject: KX-T: KX-TA Caller-ID
What, if any version of the KX-TA308
There has only been one version of the TA308, and it does CID on CW.
or TA624
I'm pretty sure it has been there from the beginning.
CALLER ID will recognize the call-waiting caller-ID from the CO? I'm talking about the caller-ID on the same line while the line is use, not the display of caller-ID from another line while you are on a call, which is what I think Panasonic's documentation calls "call-waiting caller-ID".
Also, I have seen external caller-id boxes that interface via the switch's serial port. Does anyone make a firmware upgrade for the KX-T61610 that would allow it to work with one of these external caller-id boxes?
Highly unlikely. The 616 was designed a looooong time ago, before CID was important.
Probably the best bet would be to swap it out for a TA308 or TA624.
624
This is for my home system, so I'm not afraid to kludge... ;-)<<
Panasonic systems change CID info into a proprietary data format for display on system phones. Some of the systems (not the TA308 or TA624) can also send CID info to standard phones and displays.
Michael N. Marcus
AbleComm, Inc.
www.ablecomm.com etc.
_________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
