Juan, I program my KSU [KX-TD1232] using the modem card [33K Baud] and the Programator Windows software. I call any phone line and then Transfer 299. This connects the computer to the KSU.
I also program directly using a Laptop with the same software. The cable used is a standard computer serial cable with a Null Modem Adapter at the KSU end. Software works the same way. Must be sure that you have set the software baud in the program to match that of the KSU. I keep a log of the calls on a printer [though it recently stopped working and I haven't had time to check why] I have a standard serial cable from the KSU to the printer BUT I use a Serial/Parallel interface adapter to convert the serial signal to parallel so that I can use a parallel dot matrix printer. I haven't tried sending it to a PC but I have sent alarm RS232 signals to a PC using the software Procomm and taking the RS232 port to the serial port of the computer. Again, the baud rate in the program must match the baud rate from the KSU. Hope this helps. Bob Bruskin Hallstead Electronics Ltd. ----- Original Message ----- From: Juan_2 To: [EMAIL PROTECTED] Sent: Saturday, January 19, 2002 2:20 AM Subject: connector BOB I read your message in KX-T if possibly explain to me in what manner you program the central. The pinīs assignement of RS232 cable The software you use If possibble storage the traffic information on a PC, if affirmative, what is the pins assignement of cable RS232 Juan multipart/alternative text/plain (text body -- kept) text/html _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
