Kashyap Chamarthy <kashyap...@gmail.com> wrote on 12/05/2013 04:06:40 PM:
> > Note shadow vmcs is disabled unless you have a processor > > that supports this feature. Do you ?! > > Yes, I noted this in my previous email. I'm using Intel Haswell. > > Here's the info from MSR bits on the machine(From `Table 35-3`, MSRs > in Procesors Based on Intel Core Microarchitecture, `Volume 3C of the > SDM ) > -------------------------------------------- > # Read msr value > $ rdmsr 0x48B > 7cff00000000 > > # Check Shadow VMCS is enabled: > $ rdmsr 0x00000485 > 300481e5 > -------------------------------------------- > > And, on the Kernel command line: > -------------------------------------------- > # nested > $ cat /sys/module/kvm_intel/parameters/nested > Y > > # shadow VMCS > $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs > Y > -------------------------------------------- Yep, shadow-vmcs enabled :) > Just for reference, here's the detailed procedure I noted while > testing it on Haswell -- > https://raw.github.com/kashyapc/nvmx-haswell/master/SETUP-nVMX.rst > > Also note you can disable > > shadow-vmcs using the kvm-intel kernel module parameter > > "enable_shadow_vmcs". > > Yes, to test w/o shadow VMCS, I disabled it by adding "options > kvm-intel enable_shadow_vmcs=y" to /etc/modprobe.d/dist.conf & reboot > the host. I assume you meant enable_shadow_vmcs=n :) Small question: did you try to disable apicv/posted interrupts at L0 ? (for L1 you can't enable these features because they are not emulated) -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
