(Sorry, missed this mail...)
On Mon, Jan 17, 2011 at 02:29:44PM +0200, Avi Kivity wrote:
> On 01/06/2011 12:19 PM, Sheng Yang wrote:
> >Then we can support mask bit operation of assigned devices now.
> >
> >
> >
> >+int kvm_assigned_device_update_msix_mask_bit(struct kvm *kvm,
> >+ int assigned_dev_id, int entry, bool mask)
> >+{
> >+ int r = -EFAULT;
> >+ struct kvm_assigned_dev_kernel *adev;
> >+ int i;
> >+
> >+ if (!irqchip_in_kernel(kvm))
> >+ return r;
> >+
> >+ mutex_lock(&kvm->lock);
> >+ adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
> >+ assigned_dev_id);
> >+ if (!adev)
> >+ goto out;
> >+
> >+ for (i = 0; i< adev->entries_nr; i++)
> >+ if (adev->host_msix_entries[i].entry == entry) {
> >+ if (mask)
> >+ disable_irq_nosync(
> >+ adev->host_msix_entries[i].vector);
>
> Is it okay to call disable_irq_nosync() here? IIRC we don't check
> the mask bit on irq delivery, so we may forward an interrupt to the
> guest after the mask bit was set.
>
> What does pci say about the mask bit? when does it take effect?
>
> Another question is whether disable_irq_nosync() actually programs
> the device mask bit, or not. If it does, then it's slow, and it may
> be better to leave interrupts enabled but have an internal pending
> bit. If it doesn't program the mask bit, it's fine.
I think Michael and Jan had explained this.
>
> >+ else
> >+ enable_irq(adev->host_msix_entries[i].vector);
> >+ r = 0;
> >+ break;
> >+ }
> >+out:
> >+ mutex_unlock(&kvm->lock);
> >+ return r;
> >+}
> >
> >+
> >+static int msix_table_mmio_read(struct kvm_io_device *this, gpa_t addr, int
> >len,
> >+ void *val)
> >+{
> >+ struct kvm_msix_mmio_dev *mmio_dev =
> >+ container_of(this, struct kvm_msix_mmio_dev, table_dev);
> >+ struct kvm_msix_mmio *mmio;
> >+ int idx, ret = 0, entry, offset, r;
> >+
> >+ mutex_lock(&mmio_dev->lock);
> >+ idx = get_mmio_table_index(mmio_dev, addr, len);
> >+ if (idx< 0) {
> >+ ret = -EOPNOTSUPP;
> >+ goto out;
> >+ }
> >+ if ((addr& 0x3) || (len != 4&& len != 8))
> >+ goto out;
> >+
> >+ offset = addr& 0xf;
> >+ if (offset == PCI_MSIX_ENTRY_VECTOR_CTRL&& len == 8)
> >+ goto out;
> >+
> >+ mmio =&mmio_dev->mmio[idx];
> >+ entry = (addr - mmio->table_base_addr) / PCI_MSIX_ENTRY_SIZE;
> >+ r = copy_from_user(val, (void __user *)(mmio->table_base_va +
> >+ entry * PCI_MSIX_ENTRY_SIZE + offset), len);
> >+ if (r)
> >+ goto out;
>
> and return ret == 0?
Yes. This operation should be handled by in-kernel MSI-X MMIO. So we return 0
in order to omit this action. We can add warning to it later.
>
> >+out:
> >+ mutex_unlock(&mmio_dev->lock);
> >+ return ret;
> >+}
> >+
> >+static int msix_table_mmio_write(struct kvm_io_device *this, gpa_t addr,
> >+ int len, const void *val)
> >+{
> >+ struct kvm_msix_mmio_dev *mmio_dev =
> >+ container_of(this, struct kvm_msix_mmio_dev, table_dev);
> >+ struct kvm_msix_mmio *mmio;
> >+ int idx, entry, offset, ret = 0, r = 0;
> >+ gpa_t entry_base;
> >+ u32 old_ctrl, new_ctrl;
> >+ u32 *ctrl_pos;
> >+
> >+ mutex_lock(&mmio_dev->lock);
> >+ idx = get_mmio_table_index(mmio_dev, addr, len);
> >+ if (idx< 0) {
> >+ ret = -EOPNOTSUPP;
> >+ goto out;
> >+ }
> >+ if ((addr& 0x3) || (len != 4&& len != 8))
> >+ goto out;
> >+
> >+ offset = addr& 0xF;
> >+ if (offset == PCI_MSIX_ENTRY_VECTOR_CTRL&& len == 8)
> >+ goto out;
> >+
> >+ mmio =&mmio_dev->mmio[idx];
> >+ entry = (addr - mmio->table_base_addr) / PCI_MSIX_ENTRY_SIZE;
> >+ entry_base = mmio->table_base_va + entry * PCI_MSIX_ENTRY_SIZE;
> >+ ctrl_pos = (u32 *)(entry_base + PCI_MSIX_ENTRY_VECTOR_CTRL);
> >+
> >+ if (get_user(old_ctrl, ctrl_pos))
> >+ goto out;
> >+
> >+ /* No allow writing to other fields when entry is unmasked */
> >+ if (!(old_ctrl& PCI_MSIX_ENTRY_CTRL_MASKBIT)&&
> >+ offset != PCI_MSIX_ENTRY_VECTOR_CTRL)
> >+ goto out;
> >+
> >+ if (copy_to_user((void __user *)(entry_base + offset), val, len))
> >+ goto out;
> >+
> >+ if (get_user(new_ctrl, ctrl_pos))
> >+ goto out;
>
> here, too.
The same as above.
>
> >+
> >+ if ((offset< PCI_MSIX_ENTRY_VECTOR_CTRL&& len == 4) ||
> >+ (offset< PCI_MSIX_ENTRY_DATA&& len == 8))
> >+ ret = -ENOTSYNC;
>
> goto out?
No. This judgement only check if MSI data/address was touched. And the line
below would check if we need to operate mask bit. Because in theory guest can
use len=8 to modify MSI-X data and ctrl at the same time.
--
regards
Yang, Sheng
>
> >+ if (old_ctrl == new_ctrl)
> >+ goto out;
> >+ if (!(old_ctrl& PCI_MSIX_ENTRY_CTRL_MASKBIT)&&
> >+ (new_ctrl& PCI_MSIX_ENTRY_CTRL_MASKBIT))
> >+ r = update_msix_mask_bit(mmio_dev->kvm, mmio, entry, 1);
> >+ else if ((old_ctrl& PCI_MSIX_ENTRY_CTRL_MASKBIT)&&
> >+ !(new_ctrl& PCI_MSIX_ENTRY_CTRL_MASKBIT))
> >+ r = update_msix_mask_bit(mmio_dev->kvm, mmio, entry, 0);
> >+ if (r || ret)
> >+ ret = -ENOTSYNC;
> >+out:
> >+ mutex_unlock(&mmio_dev->lock);
> >+ return ret;
> >+}
> >+
>
> --
> error compiling committee.c: too many arguments to function
>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
