Brackets for my aileron balance weights, are 1/8th inch thick 4130 steel. At the first KR Gathering, held in CA, Brad Hummel had an aileron fail, resulting in a wing failure. FAA Inspectors determined the aircraft was doing approximately 240 MPH. ( Airspeed needle was stuck there.) The Main Spar, ripped out of the fuselage, about 6 inches inside of the vertical side of the fuselage. Yes, sadly he exceeded the redline of 200 MPH.
-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet />
-- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet
