Bob, I made a template from my Diehl un-stretched tail-dragger gear legs. I'll dig it out tonight and throw together a drawing with dimensions and angles, if that's the type you're looking for. (Sorry, I don't check this as often as I used to. Bought a house, had kids, the usual story I suppose. As soon as I fix the leaks in the barn, I'll bring my plane up to live with me and get back to finishing it.) -Matt kr2pilot.blogspot.com I have the plywood template for the tri-gear KR-2 based on the Diehl gear leg size. This is the wrong template for the tail dragger version, nor the KR-2S.
Sid Wood California, MD, USA On 6/6/2021 12:58 PM, pi...@mymts.net wrote: > I have a couple fiberglass gear legs and have been looking through the > archives for reference I seem to remember about a diagram or template to > cut them down. > Does any recall that? If so could you point me to that please? > Bob Russell +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Bob, I'm surprised you haven't gotten a reply from someone with a Diehl gear leg lying around. I have a rough drawing but no dimensions. If I can find it back I have a temple I made years ago. If I locate it I'll give you a duplicate or the dimensions. Are you looking to use the legs on a KR2 or a 2s? Diehl legs for the KR2 are 24" but Jeff Scott and I went with 30" legs for our stretched KR. With my 24" stretch and a tall tailwheel the 30" leg works fine for me. Larry Flesner ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/krnet@list.krnet.org/
