Jim. I made a frame to hold the purspex window on the inside of the deck with sealant of choice and small bolts and nuts. I made different shape widows from cardboard to find the size and shape I liked Then masked the outside area of the deck, were I wanted the window to fit. (One left and right side)
Classed over that area in total (or you could just glass around the frame edge. ) Let dry, peeled it off, then cut out the frame size I wanted, cleaned it up. Then the frame is a perfect fit to the shape of the deck. Then drilled some holes and sealer Finished. PS. For my window, I used the the UV protected clear material I got from a hardware shop off a roll , it’s used for flat sky lights ( I think??? ) I will see if I can find the name of the material. Phil Matheson. Sent from my iPhone > > What should be used to install opera windows in the aft deck ? > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
