I had Aviation Products on my KR as well and the same on the Panther. I might give it a try after I get the hours off.
My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -----Original Message----- From: KRnet On Behalf Of Flesner via KRnet Sent: Friday, September 4, 2020 8:39 PM To: krnet@list.krnet.org Cc: Flesner <fles...@frontier.com> Subject: Re: KR> First Flight On 9/4/2020 6:56 PM, Daniel Heath via KRnet wrote: > Yes, I am sure of that and may try it one day. I have heard that they > are heavier than the ones we usually use. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ The wheel assembly goes for about 15 ounces and the tire probably similar. If it will fit your current assembly you'll never know the difference except the noise. I had my Aviation Products arm lengthened about 1 1/4" and the wheel axle size was the same. Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
