Luis Claudio wrote:
> I would like to see if anyone has a copy of the instrument panel in
electronic form that I >can send to a shop to fabricate.
There's an AutoCAD file of mine at http://www.n56ml.com/kpanel.html
(been there for 15 years). A more direct link is
http://www.n56ml.com/kpanel.dwg. Note that it is designed to sit on the
longerons at the point marked "7.01" down from the top, with the bottom
folded back to provide a shelf for things like terminal blocks, relays,
refuel timer, diodes, etc. Preferably, the bottom should have a bit of
a radius on it (done in a press brake). These holes are standard
aircraft size, except for the fuel and mixture gauges, which are
automotive dimensions (all with a few thousandths clearance).
It goes without saying that the CAD file isn't the image shown....it's
the file the image was made from. Somebody complained to me a while
back that the new airfoil templates were awfully jagged once blown up to
48" chord, and it took me a while to figure out that they'd used the
image rather than the CAD files!
Mark Langford
m...@n56ml.com
http://www.n56ml.com
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
