On 5/7/2020 3:08 PM, Marc Baca via KRnet wrote:
Out of curiosity has anyone used "well nuts" to mount an instrument dash.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Looks interesting. Might work out well. I used rubber corks (bottle
stoppers) from the hardware store, put tapered holes in wood mounting
blocks, and ran a bolt through the stoppers. I used a tapered bit on
the drill to taper the holes after drilling a starter hole. I made a 30
second hand drawing to give a better idea. My panel is mounted totally
in rubber for only a couple of dollars total.
https://www.dropbox.com/s/2ih4f1yjy9aow52/panel%20mount%20001.jpg?dl=0
Larry Flesner
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
