Hi Colin, You might consider laminating several pieces to get that dimensional requirement. Currently there is a Classified Ad in the Canadian Rec Flyer for some spar grade spruce that might work. ( 4 lengths of 3/4 x 6” x20 feet each). $600 CAD. Email for the ad is : pjohn...@kmts.ca phone # 807 468 4764 Regards Chris Gardiner C GKRZ
Sent from my iPad > On Apr 3, 2020, at 2:28 PM, colin hales via KRnet <krnet@list.krnet.org> > wrote: > > Hi there all. > > I'm trying to acquire spruce to remake the centre section main spars of my > damaged KR2 > > 2.160 inch by 2 inch by 84 inches. > > Spruce and Spec don't carry it anymore. They have everything else but nothing > close to the '2 inch plus' square top and bottom main spar caps. I've got > feelers out all over the world and I'm waiting for replies. > > Either that or if anyone has got a completed set of main and rear centre > spars kicking around. There is a set here in the UK, but that would mean > breaking up a boat and wing completed project and I can't face doing that. > > Cheers Colin H. > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
