Luis Claudio wrote:
<<My biggest concern is that it has the autobody injector type carb and
unlike a regular carb I wanted to know how to prime it or get fuel
flowing for a start.I have the book but I am not clear on the procedure.<<
Assuming you mean an Ellison "injector", there is a process online that
describes it. It involves providing fuel to the carb, and then blowing
through a tube into the orifice in the front of the carb to open the
fuel feed valve to get it filled. See
http://www.ellison-fluid-systems.com/support-manual.shtml , specifically
the Section 3, Initial Operation and Adjustment.
Read it all, and do it all, especially setting the mixture and throttle
travel parts. The only folks I know of that have problems with these
carbs haven't done the procedure correctly, or at all!
Mark Langford
m...@n56ml.com
http://www.n56ml.com
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
