Well my bad. I just ran the block through my cleaning tank and noticed some of the cyl hold down bolts looked suspect. A few need changed so I am going to fix them before I offer this thing up to anyone. Cause I don't sell junk...
Craig N886MJ > On November 17, 2019 at 8:57 AM Jeff York via KRnet <krnet@list.krnet.org> > wrote: > > > I have kicked around the idea of building a Corvair engine. Where in > Michigan is Roy's? If I could cut my schedule I sure would enjoy helping / > learning / goffer getting. > > I dont know the Corvair in aircraft form but I have built some pretty nice > motors including my 454 that's bored,stroked,balanced and blueptinted to a > 492 in my 6 ton vintage Airstream motorhome. I enjoy my GPAS Vw 2180 but I > know a 6 cyl is far smoother than a 4 banger. Figured that out back in the > Continental 0300D days verse Lycoming 4 banger. > > It's a wild thought. Heck I cant seem to get away from my business long > enough to sneeze the last 14 plus years. Not sure how I could get back up > to Michigan for a weekend ? But, I'm from up that way. > > Either way I might be interested in your short block to replace my 2180. > > Jeff York > KR2 > Georgetown Scott County Airport > Lexington, KY > > On Sun, Nov 17, 2019, 8:15 AM Craig Williams via KRnet <krnet@list.krnet.org> > wrote: > > > Hey folks I am headed to Michigan next week to Roys Garage to put my motor > > together. I have a second motor that is almost ready to build, just needs > > a few things. I was kicking around the idea of building my engine and a > > second short block while there but only if someone here wants to buy the > > short block. I don't need a second engine lying around collecting dust. > > If anyone is interested I will make you a deal on it. Call me to discuss. > > > > I would prefer to sell it all as a lot. Whats included: > > > > Short block with 5th bearing (or block and crank ready to install) your > > choice. > > +20 cyl's, no piston or rods > > raw heads > > Clarks High Vol oil pump > > SPA rear generator kit > > JD 20 amp gen and VR > > > > KR STUFF: > > > > MATCO wheels, tires and brakes > > Nose gear > > Lots of good steam gauges > > Cowling > > > > > > Craig > > N886MJ > > 816-797-1959 > > > > _______________________________________________ > > Search the KRnet Archives at > > https://www.mail-archive.com/krnet@list.krnet.org/. > > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > options. > > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
