Personally I tend to look for the right tool for the job. Some may call it lazy... I call it efficiency! If you have not heard of a board sander I would highly recommend purchasing one! They make sanding significantly faster and low effort from you!
I don't own the one below but have a similar model and it is the first tool I grab for any sanding project! https://www.amazon.com/Ingersoll-315-Piston-Straight-Sander/dp/B00004XOT5/ref=asc_df_B00004XOT5/?tag=hyprod-20&linkCode=df0&hvadid=309763890402&hvpos=1o1&hvnetw=g&hvrand=104015833338876458&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9014888&hvtargid=pla-435116738560&psc=1 On Sat, Jun 8, 2019, 2:44 PM Jeff Scott via KRnet <krnet@list.krnet.org> wrote: > You should be ready for a solo on the sanding song at the KR Gathering! > > > > Cc: "Mark Jones" <flyk...@gmail.com> > > Subject: KR> Wunderbird update. > > > > > > Dang it is hot down here in Florida. Nothing better than sanding a KR in > 95 degree heat. I have been sanding pretty much everyday for the last two > weeks. Sand then fill. Sand again and fill again. Sand again and fill > again. ... well you get the message. Anyway, the fuselage, stub wings and > tail empennage are all sanded and primed with two coats of Evercoat > polyurethane primer. Sure looks good. But wait. Now I need to sand the > primer. I think I will work on some of the interior now. I hate sanding. > > > > Mark Jones > > Oldsmar, Fl > > > > N771MJ “WunderBird” > > www.flykr2s.com > > flyk...@gmail.com > > > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > On Sat, Jun 8, 2019, 2:44 PM Jeff Scott via KRnet <krnet@list.krnet.org> wrote: > You should be ready for a solo on the sanding song at the KR Gathering! > > > > Cc: "Mark Jones" <flyk...@gmail.com> > > Subject: KR> Wunderbird update. > > > > > > Dang it is hot down here in Florida. Nothing better than sanding a KR in > 95 degree heat. I have been sanding pretty much everyday for the last two > weeks. Sand then fill. Sand again and fill again. Sand again and fill > again. ... well you get the message. Anyway, the fuselage, stub wings and > tail empennage are all sanded and primed with two coats of Evercoat > polyurethane primer. Sure looks good. But wait. Now I need to sand the > primer. I think I will work on some of the interior now. I hate sanding. > > > > Mark Jones > > Oldsmar, Fl > > > > N771MJ “WunderBird” > > www.flykr2s.com > > flyk...@gmail.com > > > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
