Hi everyone, Some of you might find this of interest.
All the best, Hennie South Africa ******************************************************************************************************************************** Wow Alberto, Thank you so much for your answers & for replying to my message. I will follow your good advice. Keep well my kind friend, Hennie van Rooyen South Africa ********************************************************************************************************************************* From: Alberto Pupato [mailto:alpup...@gmail.com] Sent: Wednesday, 02 August 2017 1:36 AM To: Hendrik van Rooyen <hendrik.vanroo...@njcsi.com<mailto:hendrik.vanroo...@njcsi.com>> Subject: Re: Rotax KR2 Hi Hennie A pleasure to meet you First of all, congratulations you have a very beautifull plane Now I will tell you that you have to choose very well your propeller In fact, I have a 3 blade , 64 inches warp drive prop, that the very warp drive factory counsil me to have The mater is tha it fly very good, on climbing and cruising, but in time to landing , is a very quick plane and the prop increases RPM as the plane go fast, and the plane goes 100 mph in landing whit no power in the prop. So, please be carefull choosing your prop and in the very begining have a a large landing lane . Another thing is the two radiator that you have. In my plane I have also this and the temprature always rise. So I made only one radiator with the same size the original but twice times depth (and with the same amount of pipes of both originals) If you see my photos you will note a kind of gap just down behaind the prop, and the radiator is near close behind the gap and all arround close with ruber in orther to not allow the air flow around, and I have no problems at all. Once more, a pleasure to be in contact , an have good flys Alberto ********************************************************************************************************************************* 2017-08-01 5:38 GMT-03:00 Hendrik van Rooyen <hendrik.vanroo...@njcsi.com<mailto:hendrik.vanroo...@njcsi.com>>: Hi Alberto, I am also installing a Rotax 582 in my KR2. http://microlighters.co.za/viewtopic.php?f=23&t=22857&sid=b294c32f72c56311706cc3bdfeee23f1 Do you have any advice for me? Kind regards, Hennie van Rooyen South Africa -- auguri Alberto Pupato 15 5 400 3640 _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
