What recommendations are there for propeller spinners and where to get them?
>I would look at that spinner right away if it is causing vibration. As >others have found, a slight vibration on the spinner can very quickly >become a broken spinner which can also lead to prop damage or worse. >Brian Kraut Joe Nunley Baker Florida KR2 On Tue, Jun 27, 2017 at 9:18 AM, brian.kraut--- via KRnet < krnet@list.krnet.org> wrote: > I think you will find after you have a lot more time on the plane and > start to fly it loaded at different C.G. locations that you will want an > adjustable elevator trim tab, but wait and see first. You also might > want adjustable aileron trim when you start taking passengers, but if > so, a simple spring or bungee trim system vs. a tab will be enough. > Might also be able to do that on the elevator trim with good results, > but not sure that I have seen that on a KR before. Although the > elevator forces are so light that you barely need trim it is good to > have adjustable trim so you can take your hand off the stick now and > then. > > I would look at that spinner right away if it is causing vibration. As > others have found, a slight vibration on the spinner can very quickly > become a broken spinner which can also lead to prop damage or worse. > > > Brian Kraut > 904-536-1780 > br...@eamanuacturing.com > > > > -------- Original Message -------- > Subject: KR> N269 7.6 Hour Data Download > From: Joe Nunley via KRnet <krnet@list.krnet.org> > Date: Tue, June 27, 2017 6:13 am > > > Things that I have learned in 7.6 Hours of flight: > > Trim Tabs; trim tabs are not something that you think about until you > build > your first plane. With the information that Mark sent me and the input > from all of you my plane now has fixed trim tabs that work great. I > determined that my aircraft was originally set up for a VW engine and I > installed a Continental, witch explains the large trim tab on the > elevator. > > > Vibration; I have a very slight vibration at cruse flight. I know it's > an > airplane, but I believe that the spinner that I made has a slight > wobble. > > > _______________________________________________ > Search the KRnet Archives at https://www.mail-archive.com/ > krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
