FYI, When I spoke to Roy at OSH back in the 90's he told me the reason for the
tape was that on the way to OSH he did a loop and over stressed the wings to
the point that the wrinkled the skin and he had to relieve them by cutting
around the wing.
KennyN6399U
From: Roy Keller via KRnet <krnet@list.krnet.org>
To: KRnet <krnet@list.krnet.org>
Cc: Roy Keller <rrkel...@skybest.com>
Sent: Thursday, June 1, 2017 1:28 PM
Subject: KR> N 133RM wings
In reference to this post by bruis---via KRnet. >>> For the record,
the Roy Marsh KR2S wings measure 7’3” from hinge bolt hole to tip, with
almost full width aileron...9” shorter than the wing. They are somewhat
tapered, to my surprise. Tape shows 4’ wide at the hinge plane, and 35”
at the tips, which are upturned slightly at the trailing edge. Can’t say
much about the airfoil section but they are exactly 6” thick at thickest
point at root. Of course, it is possible that they are not as original,
but I think they are.<<<
The wings with the post concerning my KR2 Super project for sale.
rrkel...@skybest.com are as described with built in wing tanks (photo's
attached). Does anyone else have additional information concerning this
platform. I'm updating the pdf file describing the project and will
email a copy if interested because its still for sale.
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
