I've seen similar results posted on various RV forums. What I haven't seen is the cost per use for each.
On Tue, Dec 18, 2012 at 6:05 PM, joe.kr2s.buil...@juno.com < joe.kr2s.buil...@juno.com> wrote: > This sounds good but my curiosity wants to know how long they soaked them > and actually if they were in a dip or just sprayed.Joe Horton >> > They are below, as forwarded by an ex-student and professional machinist. > They arranged a subjective test of all the popular penetrates with the > control being the torque required to remove the nut from a "scientifically > rusted" environment. > � > *Penetrating oils .......... Average torque load to loosen* > No Oil used ................516 pounds > WD-40 ..................... 238 pounds > PB Blaster ................ 214 pounds > Liquid Wrench ..............127 pounds > KanoKroil ................ 106 pounds > ATF*-Acetone mix.............53 pounds > � > The ATF-Acetone mix is a "home brew" mix of 50 - 50 automatic transmission > fluid and acetone. Note this "home brew" released bolts better than any > commercial product in this one particular test. > � > passed to me from EAA friend. > > Alan > 541-531-9245 > _________________________________________________________ > search the CorvAircraft archives at > http://tugantek.com/archmailv2-cvr/search. > To UNsubscribe from CorvAircraft, send a message to > corvaircraft-le...@mylist.net > Other CorvAircraft list info is at > http://www.krnet.org/corvaircraft_inst.html > ____________________________________________________________ > Woman is 53 But Looks 25 > Mom reveals 1 simple wrinkle trick that has angered doctors... > http://thirdpartyoffers.juno.com/TGL3141/50d10524aeb4f5246f26st03duc > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > -- David, kb0zke Rev. 2:10c
