does this mean my current brake valves are worthless at that point?? Sent from my Windows Phone From: Dave_A Sent: 10/13/2012 1:41 PM To: KRnet Subject: Re: KR> Brake lock 3rd master cylinder, 'latching' lever for an actuator, check valves & T-fittings?
It would not work to hold already-stepped-on brakes, but it would apply and hold both brakes as long as the lever was latched in the 'applied' position. Eg: 'extra' MC -> tee -> lines to each side brakes -> check valve in each line -> 2 more tees to tie them in with the per-side brake lines... Then a flap-handle style brake actuator that 'locks' in various positions (eg, can be locked in 'brakes on' position)... On 10/13/2012 9:39 AM, Jose Fuentes wrote: > I got a couple valves and I figured I would use it to hold the brakes. > Problem is the brake valves won't close while under pressure. This makes > them useless. > > Any ideas how to fix this? > > Sent from my Windows Phone > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
