Christopher Pryce wrote: > "I've searched the archives and read every old email about where to > get the 2x4x.125 angle stock but I cant find it anywhere"
You don't actually need that piece of aluminum unless you are using a "standard" engine mount like an old HAPI or others that fasten toward the middle of the firewall. My motor mount was designed to connect up to the corners of the firewall, which is a more efficient and stronger design than fastening it to toward the center, and very little aluminum is needed to back it up. Take a look at http://www.n56ml.com/kfuse.html to see what I mean about "minimal". My hayfield incidence managed to tweak the mount a little bit, but this connection is still fine. This little backing plate weighs just about nothing, and is cut out of scrap from another piece of 1/8" 6061-T6. Just a thought... Mark Langford ML at N56ML.com see experimental N56ML at www.N56ML.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Christopher Pryce Sent: Wednesday, August 01, 2012 11:04 AM To: KRnet Subject: Re: KR> Aluminum for bellcrank Wow, I don't know how I missed that. Thanks! On Wed, Aug 1, 2012 at 11:01 AM, Teate, Stephen <ste...@compositecooling.com > wrote: > "I've searched the archives and read every old email about where to > get the 2x4x.125 angle stock but I cant find it anywhere" > > Christopher, > > Aircraft Spruce carries 2 1/2" x 4" x 1/8" angle under the 6061-T6 > aluminum angle drop down. > > Stephen Teate > Paradise, Texas > > P.S. Welcome to the party! > > ************************************************************** > The information in this email is confidential and may be legally > privileged. If you are not an intended recipient, you should delete > this message. Access to this email by anyone else is unauthorized, > and any disclosure, copying, distribution or action taken or omitted > in reliance on it is prohibited and may be unlawful. > ************************************************************** > > > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > _______________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
