KR> Fuel sender

[Rodger Nicolls]

I'm building wing fuel tanks measuring 70" long, 10-12" wide (up against
main spar), 6" deep at inside end and 4" deep at far end. Any suggestions
for fuel sending unit?  I have a pair of Rochester units which would only
measure the fuel at the deep end, but a capacitance unit would measure only
the first 24" inch, still less than half of the tank--and that's after
spending another $ 140-160 for each tank. Opinions welcomed.
Rodger Nicolls
bandenok...@gmail.com
Anchorage, AK