DEKOTE from Aerochem.net is one that comes to mind. Used this on a hovercraft one time with good results.
There are others out there. A google search for "paint stripper for composites" or "paint remover for composites" might yield some relevant results. On , Jose Fuentes <jose.fuen...@gmail.com> wrote: > Also if it's chipping, you could scrape it off but be very careful, don't > dig just scrape, I got alot of this horrible chippy paint off my project > that way. Sometimes as I was sanding it would start chipping off and I > stop > sanding to chip again. I don't know what kind of paint it was, I suspect > somehting not very flexible. > Joe > On Wed, May 30, 2012 at 5:53 AM, Dan Heath da...@windstream.net> wrote: > > The only way I have found to do this is to sand. And, the best sander > that > > I have found to do it, is the Skill Octo. Give it a try. > > > > See N64KR at http://KRBuilder.org - Then click on the pics > > See you at the 2012 - KR Gathering in Mt. Vernon, Il ? MVN ? 40th > > Anniversary > > There is a time for building and it is over. > > Daniel R. Heath - Lexington, SC > > http://www.krbuilder.org/MyUSA/ > > > > > > > > _______________________________________ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > -- > Jose Fuentes > Founding Father (one of and former Vice Prez) of Capital City.NET User's > Group > Former Microsoft MVP > http://blogs.aspadvice.com/jfuentes > _______________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
