Installation of the Dieh Wing skins requires a different aft WAF that increases the forward taper of the rear spar to fit the wing skin.
-Jeff Scott ----- Original Message ----- From: Craig Williams Sent: 02/21/12 10:02 AM To: K Rnet Subject: KR> attaching Deihl wing skins All Could not find the answer in the archives or the install PDF. So today I trial fitted my RH lower wing skin. The manual says the center of the spars at 78.5" should be 15". The wing skin attachment areas don't seem to follow that taper of the rear spar from the WAF all that well. Is the 15" critical or could you go 1" either direction. I think the 15" sets up the 3 deg fwd angle of the rear spar but it doesn't seem that it should be all that critical. Here's a picture: http://www.kr2seafury.com/resources/DSCN0021.jpg Other pics: http://www.kr2seafury.com/11.html Craig www.kr2seafury.com O-200 powered _______________________________________ Search the KRnet Archives at http://mylist.net/private/krnet/ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
