I believe that "Todds" canopy instructions I received with my canopy stated not to use polyester because it will eventually cloud the plexi. But then I would ask the manufacturer of the bubble first. Don't trust me.
Steve Phillabaum Shorter, Alabama (Just down the road from Tuskegee Airport and Museum) -----Original Message----- From: Phil Matheson <phillipmathe...@bigpond.com> To: 'KRnet' <kr...@mylist.net> Sent: Sun, Feb 19, 2012 9:27 pm Subject: RE: KR> Canopy Frame What type is best and should I rough the plexiglass up to get it to stick? --------------------- I used west system, but I'm told any Epoxy will work. BUT since I did mine, a friend who makes canopies told the Polyester resin ticks much better to the plexi then epoxy, then you could use the epoxy to ake the frame as it will stick VERY well to the Polyester. Or use polyester for all the frame. Get an off cut of plexi and use polyester on one and epoxy on the other and ee which one comes off the easiest, you will be surprised, I was. Both work well. Phil Matheson own under. _______________________________________ earch the KRnet Archives at http://mylist.net/private/krnet/ o UNsubscribe from KRnet, send a message to krnet-le...@mylist.net lease see other KRnet info at http://www.krnet.org/info.html ______________________________________ earch the KRnet Archives at http://mylist.net/private/krnet/ o UNsubscribe from KRnet, send a message to krnet-le...@mylist.net lease see other KRnet info at http://www.krnet.org/info.html
