On 12/28/2011 9:42 PM, aviato...@phreego.com wrote:
> You might want to actually check those rib coordinates (above and
> below cord line) against the master print. I did and found some
> variations.
>
Thanks. This was from the 4/11/75 revised plan sheet backside, from
which my plane was built. I dug into the KR Newsletters and saw a lot of
corrections which needed to be made, (including the 3 part 48 inch rib)
and MAY have been made on my KR (or may not..I'm going hunting!). I also
notice that on the 2 parts of the OUTBOARD template, the reference line
(which appears to be the chord line) didn't align between the sections
(though THAT was never noted in the KR Newsletters). So for the
experience, I'm going to draw up a new set of templates from the
coordinates. I'm also going to transcribe the corrections from the KR
Newsletter to my plan set. I have a set of newer plans and workbook,
but I'll walk through this just to see if they'll line up with the newer
plans. If they do, then I'll know i understand it completely. Thanks for
the info Jim, and thank GOD for the KR newsletters!
--
Glenn Martin,
KR2 N1333A,
Biloxi, MS
