Believing a torque wrench can have some serious consequences . i just believed one and set head torque on an engine to find i had over torqued it . strippped one crankcase thread completly out in flight = 3 hrs and helicoil sorted that . loss of compression coming out of head seal in flight ...
other studs also giving me grief ,,,in all about 8 hrs work but could also have brought me down = safety issues We tested a brand new one right out the box and that was miles out ... So check them all phill ________________________________ From: M&C <aviato...@phreego.com> To: KRnet <kr...@mylist.net> Sent: Monday, October 17, 2011 5:20 AM Subject: Re: KR> Encapsulating I've heard you can mix rubbing achohal with it and the achohal will evaporate out after you have spread it. You might test that on something first. Mike Turner Edgewood N.M. ----- Original Message ----- From: John Backer To: KRnet Sent: Sunday, October 16, 2011 8:05 PM Subject: Re: KR> Encapsulating What are the current thoughts on how to thin epoxy to get a good flow? > > Dana Overall > > Have you tried heat? I have used a hair drier many times to get epoxy to flow. You might try some samples to see if it does what you would like. John Backer _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
