Build sides. bBend together and place crosspieces as shown.
tThe other dimensions will be measured after bending and
fill in, Virg
On 8/14/2011 2:52 AM, Tim Caughron wrote:
> Hi guys, sitting down tonight to plan the layout of my fuselage. Now, I love
> logic puzzles, and am pretty good at them, but this is ridiculous. I'm
> hoping someone can take a minute and check to see that I have a full
> inventory of plans here. I purchased plans KR-2 #9809/KR-2S #1196 in January
> 2005 from RR. Maybe I'm crazy, or just need to make up some dimensions, but
> I cannot figure out some of these.
>
>
>
> For instance, looking at the Horizontal Framing Layout on Dwg A for the 2S,
> it only gives me the width locations of Stn's A, D, and G. It shows the max
> width between F& G and straight from Stn I. Nowhere does it give me the
> width of Stn O, or any other location that would allow me to figure the
> correct dimensions. I looked through every page in my manual, and the best
> it does is tell me to refer to the plans for all the correct dimension of
> the layout???
>
>
>
> Can anyone tell me if there is a dimension sheet for all the called out
> parts on the drawings? Seems there should be a reference to say Station A -
> O are xx inches in length, or there should be some key dimensions to allow
> one to figure those out. At the very least, the plans should tell me how
> wide the aft end of the longerons should be dimensioned - come on!
>
>
>
> Another cause for concern with my plan set is I plan to build a tri-gear
> version. Nowhere on any drawing is tri-gear addressed, and the manual deals
> only with tail-gear details - no mention of tri-gear period! I'm sure the
> situation is worse the farther from simply laying out the fuselage frame I
> will get. Am I missing something here?
>
>
>
> Here is an inventory of the plans I received with this set, if someone
> notices something missing, please let me know so I can try to contact
> Jeanette and get them, thanks:
>
>
>
> KR-2 Drawings
>
> Dwg 1 - Fuselage Assy.
>
> Dwg 2 - Inboard / Outboard Wing Template, Flap Hardware&
> Assembly
>
> Firewall Template - Full Scale
>
>
>
> KR-2S Drawings
>
> Dwg A - Framing Layouts
>
> Dwg B - Various Details
>
> Firewall Template - Full Scale
>
> W1 - Spar Details
>
> W2 - Wing Details
>
> W3 - Airfoils
>
>
>
> Thanks to anyone that can help me. Maybe I shouldn't be so concerned with
> every detail, but this seems like an awful lot of guessing.
>
>
>
> Tim Caughron
>
> caugh...@bak.rr.com
>
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
