Chris, What I did was to apply high temp fireplace silicone to the wood firewall. I simply spread a thin coat over the entire firewall and then applied a sheet of fiberfrax to it. I allowed this to cure and then did the same for a sheet of stainless steel. The silicone will hold both the fiberfrax and SS in place while you mount everything to the firewall.
Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com ----- Original Message ----- From: "Chris corbine" <chriscorb...@yahoo.com> To: <kr...@mylist.net> Sent: Sunday, July 24, 2011 3:24 PM Subject: KR> Firewall Covering Netters, What is the best method to cover the firewall plywood and make it fireproof? I was thinking I'd use sheet metal (about 22 gauge SS) But I do not know of a good adhesive. I was wondering if there are any other good ideas out there.. All inputs are welcome... Thanks, Chris Corbine _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
