Sounds like youre looking for a capacitive fuel probe. Aircraft Spruce sells them as a package with a probe and a gauge. http://www.aircraftspruce.com/catalog/eppages/skysportfuelsys.php or just the probe itself http://www.aircraftspruce.com/catalog/inpages/princefuelprobes.php . They can be ordered in any length needed and can be cut and bent to fit many applications. Cheers, David
--- On Wed, 7/20/11, Pete Klapp <pke...@hotmail.com> wrote: From: Pete Klapp <pke...@hotmail.com> Subject: KR> Fuel tank probes To: kr...@mylist.net List-Post: krnet@list.krnet.org Date: Wednesday, July 20, 2011, 1:04 AM Tried sending this to Larry Flesner privately, but it bounced back as undeliverable. So here goes via the KRnet --Forwarded Message Attachment-- From: pke...@hotmail.com To: fles...@verizon.net Subject: Fuel tank probes List-Post: krnet@list.krnet.org Date: Tue, 19 Jul 2011 20:59:54 -0400 Larry I think I remember that you posted an email about fuel tank probes that were 3 to 4 foot in length that could be fastened diagonally along the tank from highest point at the outboard tip to the low point at the inboard end. I also remember this probe mounted within a perforated tube support. Does this ring any bells? I tried searching the archives, but no luck. I'm trying to locate a source for this type of probe and then hopefully, find a fuel gauge that will be compatible with the signal output of the probe. Any help on this would be greatly appreciated. Thanks, Pete Klapp P.S. Are you going to Oshkosh? _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
