Thanks, We will build the fwd deck removable so that should not a problem. But what is the differents between the 2 and the -2S. We are building a -2 with the -S tail and stab. So wat need I to do in the front of the Fusselage. Prob some pics will help. Thanks
Stef den Boer Stef and Ted are building the KR-2S see http://www.masttotaalconcept.nl/kr2 ________________________________ Van: krnet-bounces+stefkr2=kpnmail...@mylist.net namens velocityo...@yahoo.com Verzonden: di 5-4-2011 16:24 Aan: KRnet Onderwerp: Re: KR> RE: Firewall attachment Sorry guys it sent before I was ready. Anyway the header tank removes allowing complete access to the back of the panel, brakes, etc. I can send pics when I get off work in three weeks if you are interested. Victor Taylor Sent from my iPhone On Apr 5, 2011, at 8:30 AM, "Teate, Stephen" <ste...@compositecooling.com> wrote: > Hello Stef, > > If you are building a 2S then the firewall has already been reinforced for a > 100 HP engine. Actually the framing behind the firewall is what was changed. > The top cross beams and shelf were all increased and I believe the gussets > are also larger if I remember correctly. I will make one suggestion to you as > I am in the engine installation phase myself. First install the firewall with > temporary screws as you will probably want it on and off several times before > you are finished. I cut a small access door through my firewall, similar to a > lot of Pipers, for inspection and access to components mounted in this area > because I swore I would never "instrument panel dive" again! I am also > installing all components without the SS firewall in place so that when > everything is up and running then I will only cut the holes I need. As I am > liquid cooled there is a certain amount or R&D involved and sometimes you end > up putting holes in the firewall that will interfere with something else. > > Regards, > > Stephen Teate > Paradise, Texas > > > -----Original Message----- > From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of > stef...@kpnmail.nl > Sent: Tuesday, April 05, 2011 7:31 AM > To: kr net > Subject: KR> Firewall attachment > > Hey guys, > > Over here in the Netherlands we are bussy with the fwd deck, canopy frame and > the aft deck. If I am looking at the next stage we have to think about the > fire wall. We have made the decision to go for an 100 HP engine. Did any of > you make the connection from the firewall to the fuselage stronger ? How did > you do it? > > Thanks Stef > > > > > > > > > Stef and Ted are building the KR-2S see > http://www.masttotaalconcept.nl/kr2 > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > ************************************************************** > The information in this email is confidential and may be > legally privileged. If you are not an intended recipient, > you should delete this message. Access to this email by > anyone else is unauthorized, and any disclosure, copying, > distribution or action taken or omitted in reliance on it > is prohibited and may be unlawful. > ************************************************************** > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
