I have wing tanks that will feed to a small header tank.  it bolts directly to 
the frame.  I have only just ordered Tony B's book so I haven't read anything 
about not doing so.  However, I do intend to bolt it directly to the frame - I 
feel I am too far down the road to start changing things now.  However I will 
incorporate some kind of rubber bushings/straps into the process.  I probably 
would have done that anyway, even without this thread.
My plan is wing tanks with electric pumps (copying part of it from Langford's 
setup).  In addition to calculating how much fuel I have, I intend to have a 
"sight gauge" on the header so I can always see how much fuel I have.
 
Ray
New Orleans
 


--- On Fri, 1/14/11, Jose Fuentes <jose.fuen...@gmail.com> wrote:


From: Jose Fuentes <jose.fuen...@gmail.com>
Subject: Re: KR> header tank hold downs
To: "KRnet" <kr...@mylist.net>
List-Post: krnet@list.krnet.org
Date: Friday, January 14, 2011, 7:18 AM


Yea thats what I was planning on doing as well, to make it easier to do
maintaince and annuals and such. Though what if you use strips of
Rubber between the frame and the tank? That way it's not resting directly on
the frame?

Even if you use straps you probably want to use rubber on the straps to keep
them from rubbing a hole into the tank.

Joe

On Fri, Jan 14, 2011 at 8:11 AM, <phillabaum...@aol.com> wrote:

>
> What different types of Header tank hold downs are being used in the KR?
> Toni B. book states to use straps and do not rest the tank on the plane
> frame.  I will have a separate removable header tank that is not connected
> to the forward deck.
>
> Steve Phillabaum
> KR2Swide
> Shorter, Alabama
> 334-740-0066
>
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>



-- 
Jose Fuentes
Founding Father (one of and former Vice Prez) of Capital City.NET User's
Group
Former Microsoft MVP
http://blogs.aspadvice.com/jfuentes
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html




Reply via email to