-----Original Message-----
From: Mike Taglieri <miket_...@verizon.net>
How narrow a table can I get away
I guess you could use one 24" wide but you will wish you had the extra width if
you can afford the space.
The plans seem to want me to build the tail after the boat, but I
t see why I can't do that last, and without the tail, the boat turned
deways can get through the door, maybe even with the wing spars on.
built my Horizontal Stab. and Elevator first along with all the spars. When
completed I put under my bed. (better check with the misses) I built all my
hardware next. Then the fuselage. You might not get the fuselage out that door
with the rudder spar and center spars in place. You could widen the door if
the wall is big enough.
re these the latest version, and if
ot, is there a way to get the later ones?
If you are building a 2S make sure you have the supplement. Just remember when
you modify one thing you must modify something else for it to work.
Steve Phillabaum
KR2Swide, Shorter Alabama, 334-740-0066
