Just to pass along some info from a talented pilot and welder friend. There is alot of interesting info and discussion of HF welders on this site.
http://www.weldingtipsandtricks.com/ My question is: I once saw several pictures of a side stick setup in a KR. There was a diagram of the linkages and mounting points. I would love to be able to find those pics again if anyone knows where they are. Also there was an article titled something like "why not to make your own canopy". I thought it was one or two links downstream from something on the general KrNet page but I can't find it again. If anyone could point the way to either of these I would greatly appreciate it. Thanks GT gtme...@yahoo.com --- On Fri, 11/5/10, John Caudle <jdl...@yahoo.com> wrote: > From: John Caudle <jdl...@yahoo.com> > Subject: RE: KR> Welder > To: "KRnet" <kr...@mylist.net> > Date: Friday, November 5, 2010, 4:11 PM > Hi Marlyn, > > I think you have that backwards. A/C is used for > aluminum. > > J.E. Caudle > > Fenwick, WV > > 363TB (On the Bench) > <<SNIP>> > I researched this welder and discovered that it is AC only > (DC sine wave > is required for welding Aluminum)that is why they say "(not > suitable for > aluminum)" > <<SNIP>> > > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
