LOL thanks, I have so many custom changes to my BD plane that anyone experenced with the model will note them real fast LOL.
I've been wanting to do a fly by wire design too, would be super easy, but I've been stuck on how to do the backup stick for manual control if something was to happen to the electronics. joe On Tue, Nov 2, 2010 at 5:15 PM, Bob Buzby <fatl...@hotmail.com> wrote: > > excellent experimental philosophy...! LOL ! > > > Date: Tue, 2 Nov 2010 16:51:44 -0400 > > Subject: Re: KR> welding aluminum > > From: jose.fuen...@gmail.com > > To: kr...@mylist.net > > > > Is the goal here to make alumn tanks? > > > > I did that for my BD4 but, I had made a cardboard mockup of the tank that > > fits in the hole and gave it to a shop and said MAKE IT REAL, they made > it > > real alright LOL. > > > > Next time I'm going to use that foam stuff and place a big bag in the > area > > and fill it with the foam and wait for it to harden, probably alot easier > to > > make a mold that way LOL. > > > > Joe > > > > On Tue, Nov 2, 2010 at 3:20 PM, Craig Williams <kr2seaf...@yahoo.com> > wrote: > > > > > John, > > > > > > Yes, all that I have read and seen about gas welding aluminum indicates > > > that finessing the flame is key. The only way to learn it is by doing > and > > > getting the feel. I look forward to the challenge. > > > > > > Craig > > > www.kr2seafury.com > > > > > > --- On Tue, 11/2/10, John Caudle <jdl...@yahoo.com> wrote: > > > > > > From: John Caudle <jdl...@yahoo.com> > > > Subject: Re: KR> welding aluminum > > > To: "KRnet" <kr...@mylist.net> > > > Date: Tuesday, November 2, 2010, 4:48 PM > > > > > > Hi Craig, > > > > > > Welding aluminum with gas is about the same as using a TIG. > > > With gas you will also need flux. Aluminum welding takes lots of > practice. > > > I would suggest you pickup some stock that is thinner than what you > > > will be using to build the tank and practice. Heat control is the road > to > > > success. When the aluminum will turn shinny one of two things will > happen. > > > 1) You make a hole. 2) You start welding. > > > > > > net.org/info.html > > > > > > > > > > > > > > > _______________________________________ > > > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > > > > > > -- > > Jose Fuentes > > Founding Father (one of and former Vice Prez) of Capital City.NET User's > > Group > > Former Microsoft MVP > > http://blogs.aspadvice.com/jfuentes > > _______________________________________ > > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > -- Jose Fuentes Founding Father (one of and former Vice Prez) of Capital City.NET User's Group Former Microsoft MVP http://blogs.aspadvice.com/jfuentes
