I thought I was responding to the seller not the KR net....sorry
----- Original Message -----
From: cruz...@frontiernet.net
To: "KRnet" <kr...@mylist.net>
Sent: Wednesday, July 28, 2010 7:50:40 AM
Subject: Re: KR> Parts value
I am interested intwo items below. Can you tell me what you want for these
items with shipping to USA zip code 14883. Thanks Joe Cruz
1) Fiberglass landing gear legs and front gear strut with oleo for tricycle
gear
2) AS 5046 wings ...$?
----- Original Message -----
From: pi...@mts.net
To: kr...@mylist.net
Sent: Wednesday, July 28, 2010 12:29:03 AM
Subject: KR> Parts value
Here is the list of parts,
I have KR2 (with the S supplement) plans and may be interested in some of these
but don't know realisitic values.We are a bit out of the way being in Winnipeg
but he may also be able to ship them.
KR2 Parts List Project
built 1984 More or less complete aircraft last flown approximately 5 yrs
ago.
Needs complete dismantle and total
rebuild check for mould inside as it has been stored outside and has extensive
mouse droppings inside.
Includes dismantled VW engine with two
sets of heads, requires total examination of crank etc. as reason for teardown
unknown.
Two boat stage fuselages? deemed to be quite dried out and coming apart in
areas as well as splitting visible on longerons.
One has center fore and aft
spars in place with wing attach fittings and bell cranks but discoloration on
outboard of spars
Two propellers
Various spars center and wing
two stabilizer and elevator frameworks and three complete horizontal
stabilizers and elevators
Various exhaust parts
One turtledeck, which doesn?t quite fit either fuselage
One Gas tank and forward deck
One set of AS 5046 wings need finishing and are built with pink rigid R10 foam
One set of Fiberglass landing gear legs and front gear strut with oleo for
tricycle gear
One set of retractable original rand design landing gear for taildragger
configuration
One canopy plexiglass with broken edge on the back but is usable
One instrument panel blank
Various aluminium parts including some wing attach fittings (partially
finished) and partial hinges, flap handle, bolts, etc.
Assortment of foam included, has been in the open subject to light and appears
to be somewhat brittle
Any feedback is appreciated.
Bob
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
