Here is a system you may want to consider: http://curedcomposites.netfirms.com/finish.html
Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com ----- Original Message ----- From: "MICHAEL SYLVESTER" <shagste...@hotmail.com> To: "KRNET" <kr...@mylist.net> Sent: Monday, February 15, 2010 9:39 PM Subject: KR> Slick finnish. Hey Guy's, I finally have the wings covered with foam and am looking forward to glassing them asap(which is always a month longer than I had planned.) Is peel ply the way to go for a slick finish and why is there not a good web site for the cosmetics on the KR ? The reason I ask is I attended a composite class while at Sun N Fun and the speaker recommended, after wetting out the glass and sqeegeing off the excess to pour dry micro balloons over the wing and brush it around to fill in the weave. After drying just rake the excess back into the can. He said that this would be lighter than the peelplying method but how much weight are we talking here ? Is there a best way to do this ? Mike Sylvester kr2s builder Birmingham,AL. Cell no.205-966-3854 _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. http://clk.atdmt.com/GBL/go/201469230/direct/01/ _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
