Thanks to Oscar Zuniga for his help. But Matco where a great help, see a copy of their reply. --------------------------------------------- Phil, We have some of that body style available. The part number is MCMC1H and is at our website at http://www.matcomfg.com/HousingMC1-idv-3678-46.html. The drawing for the MCMC-1 is at http://matco.veracart.com/pdf/mastercylinder1a.pdf?Iit=2614&Ict=21
You should also get the rebuild kit MCMCRBD1 as long as the unit will be apart, it is a good idea to replace the seals. That unit requires bonding of a rubber plug to the bottom of the shaft. We use Loctite brand BlackMax adhesive but any fast set adhesive that works in a petroleum environment will work as well. The MCMC-5A is 0.5 inches shorter than the MCMC-5 and is used in place of the MCMC-1. The reservoir diameter is larger on the MC-5 series and can sometimes complicate the retrofit process. Please let me know if more is needed. Thank you, George R Happ MATCO mfg 801-335-0582 801-335-0581 (F) www.matcomfg.com Technical Support Disclaimer: While we strive to ensure that the advice/information provided through our support is correct, MATCO mfg does not accept any responsibility for errors or omissions. Any advice or information that MATCO mfg gives you via any form of communication is not a guarantee that it will correct your problem. It is only offered as assistance to you. MATCO mfg will not be held responsible for any loss or damage as a result of our advice or information supplied. Phil Matheson SAAA Ch. 20 http://www.saaa20.org/ VH-PKR Australia EMAIL: phillipmathe...@bigpond.com KR Web Page: www.philskr2.50megs.com
