At 07:45 PM 7/1/2009, you wrote: >Howdy all, > >I have been making good progress on my wing assembly: >Scott ++++++++++++++++++++++++++++++++++++++++++++++++++++++
It looks like you've been putting in some hours in the shop and the work looks good. After looking over the photos I have one question and one concern. Why are you using UNI cloth when the KR uses a BID cloth. The concern I have is with the landing gear leg mount. Mounting the leg between two foam / glass ribs doesn't seem anywhere near strong enough to me. What additional reinforcement will be added? I guess I have one more observation. Why go through the trouble of sanding the "notches" in the foam between two ribs? Why not use a good straight wider sanding board and sand it to shape using those two ribs? Seems like that would be easier than trying to "blind" sand with a short board using the notches as a reference. I guess there's more than one way to make a sandwich so whatever works is fine. Oh, one more question? Are you building any twist in the wing for aileron control during a stall as in the KR2? Larry Flesner
