I see how the forward bulkhead is screwed to the prop hub but not to the Spinner. So the forward bulkhead exists only for internal support of the spinner but is not attached to the spinner directly?
I thought perhaps there would be screws through the spinner into the forward bulkhead much like the rear one. Scott ---------------------------------------------------- Take a look at the top two pictures at <http://www.vla.com/jscott/props/princeprop.html>, You'll see the screws through my spinner into the front bulkhead. I used to use the same model spinner with it only screwed to the rear bulkhead and a tight friction fit over the front bulkhead, but after roughly 300 hours, the spinner started developing cracks due to the spinner and the front bulkhead wearing on each other. -Jeff Scott Los Alamos, NM ____________________________________________________________ Let your voice be heard! Click here and get paid to participate in surveys! http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTEFxM4T2jSN0cUrysI3tAm9WW5az9vIeW5Hn44fNpjuFXOF7YF2k4/
