The first thing that I should have done, was to be sure that I was using the latest manual. I will have to check with Steve to see if he sells any of those thin washers or shims. I can only hope that 80 # did not ruin the hub. Thanks for the information.
See N64KR at http://KRBuilder.org - Then click on the pics See you at the 2009 - KR Gathering in Mt. Vernon, Ill There is a time for building and a time for FLYING and the time for Flying has begun. Daniel R. Heath - Lexington, SC -----Original Message----- According to Great Plains assembly manual revised June 2003 on page 32, take of .005" to the thick washer,or add an additional thin washer, if the hole does not line up. Also the torque value is 60 to 70 ft-lbs.
