Be careful with the resin that has begun to harden. If it is just that it is cold and needs to come back to room temp, then no problem. If it has actually begun to harden and requires elevated temp to flow, then the cross linking within the resin has begun. It can be heated and used. I have done so on non-critical applications; however, the final bond strength will be reduced. On aircraft structure, that could spoil your whole day. Be careful.
--- On Thu, 12/18/08, Mark Jones <flyk...@charter.net> wrote: From: Mark Jones <flyk...@charter.net> Subject: Re: KR> epoxy / resin To: eduna...@yahoo.com, "KRnet" <kr...@mylist.net> List-Post: krnet@list.krnet.org Date: Thursday, December 18, 2008, 3:53 PM Eduardo wrote: i noticed that the resin (t88) got hard... what do you suggest me to do? Hi Eduardo, Put it in the microwave for 15 seconds. Longer if needed. You should be good to go. You could also use hot water but that will take longer. Mark Jones (N886MJ) Stevens Point, WI Web page: www.flykr2s.com e-mail: flyk...@charter.net _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
