I used a plastic resturant ketchup bottle. I mixed the T88 with a metel rod with a hook on the end that I flattened out with a hammer. I put the pointed top on the bottle and cut off a bit of the tip at an angle and squeezed the T88 out in a long string along the strips of wood and then used a solder brush to smooth put the bead and dropped the side ply onto the strips, moved it around a bit to get a good glue bite and let it set up. (Use staples for clamps). Do not forget to turnthe side over so that the excess forms a filet with the side instead of driping down the side stringers and gluing to the table. (Don't ask me how I know). Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran
--- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
