....and I use my gold specimen scales which are accurate down to .01 of a gram.
On 5/10/07, Dave Arbogast, CISSP <k...@arb.net> wrote: > > I would add to that - most postage scales I've used are in half ounce > increments = 14.17 grams..... not nearly accurate enough for me. I use > a triple beam balance scale like the drug dealers use in the movies. > More accurate than I need, but simple. > > -dave > > Darren Crompton wrote: > > >I have been mixing my T-88 by weight using a ratio of 13 : 1. That is 13 > >grams of epoxy and 11 grams of hardener, which is so close to the 100 : > 83 > >ratio that is not funny. > > > >3 : 1 may work with your 7 year old's matchstick castle project but on > your > >aircraft......forget it!! > > > > > > > >On 5/10/07, Brian Kraut <brian.kr...@engalt.com> wrote: > > > > > >>Per the T-88 technical data sheet the ratio is equal parts by volume or > >>100 > >>parts resin (Part A) to 83 parts hardner (Part B) by weight. I keep 100 > >>and > >>83 written on my bottles with a Sharpie so I can find the ratio when I > >>need > >>it. I always mix by weight. > >> > >>The data sheet is pretty good and can be downloaded on the Ssytem Three > >>Web > >>site at http://www.systemthree.com/index_2.asp. Click on register near > >>the > >>top right then log in and click on the technical data sheets. > >> > >>Brian Kraut > >>Engineering Alternatives, Inc. > >>www.engalt.com > >> > >>-----Original Message----- > >>From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On > >>Behalf Of Myron (Dan) Freeman > >>Sent: Wednesday, May 09, 2007 7:10 PM > >>To: KRnet > >>Subject: Re: KR> Glue Joints not holding > >> > >> > >>Hi Nick; > >> > >> > >> > >>>I have 2 kits of T-88 from ACS, and both say 50-50 mix....is that > really > >>> > >>> > >>incorrect? > >> > >>No Nick, that statement is correct but it reads "mix equal parts buy > >>volume" > >>on the bottle however on the Wicks site it says "Mix ratio: 100 to 83 by > >>weight" but doesn't say which is which, or "1 to 1 by volume". Aircraft > >>Spruce doesn't give any mixing instructions but does say it will cure > down > >>to 35f degrees but the bottle says "for best results use at 50f degrees > or > >>above". The system three web site says "mix 1:1 by volume and it also > says > >>it will cure down to 35f degrees. I have never had a problem or a doubt > >>about T-88 mixed 50/50 by volume but I do have a heated construction > area. > >> > >>Regards > >>Myron (Dan) Freeman > >>Indpls, Ind. 46203 USA. Home of the > >>2007 World Champion Indpls, Colt's > >>mfreem...@indy.rr.com > >>Posted - Wednesday, 05/09/07 7:10 pm > >> > >> > >>_______________________________________ > >>Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > >>to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > >>Post photos, introductions, and For Sale items to > >>http://www.kr2forum.com/phpBB2/index.php > >>please see other KRnet info at http://www.krnet.org/info.html > >> > >> > >> > >> > >>_______________________________________ > >>Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > >>to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > >>Post photos, introductions, and For Sale items to > >>http://www.kr2forum.com/phpBB2/index.php > >>please see other KRnet info at http://www.krnet.org/info.html > >> > >> > >> > > > > > > > > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > Post photos, introductions, and For Sale items to > http://www.kr2forum.com/phpBB2/index.php > please see other KRnet info at http://www.krnet.org/info.html > -- Darren Crompton AUSTRALIA www.kr-2s.com
