I understand what he has done, and to answer your question about sitting flat on the hub. It will not. With the 1/8" large washer inside the large hole in the prop, the prop now rests on the washer at the protruding end of the hub. Fix is 1/8" washers installed on each of the prop attachment bolts between the prop and hub, thus, there will be 7 points of contact for the prop to sit on.
Bob N339RJ -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Randy Smith Sent: Wednesday, February 21, 2007 9:37 PM To: KRnet Subject: Re: KR> Re:washer add to prop extension. What it sounds like is a very large washer (the size of the hub) 1/8 inch thick. But then When you read it it sounds like hyou filled the end of the hole. How do you make the prop sit flat on the hub? --- wcraw...@cmhc-schl.gc.ca wrote: > The wood prop already has a bored centre hole 2ΒΌ" > and the whole thing > that fits quite well over the 5" extension with 6 > bolts. The hole is > counter sunk about 3" deep, All the washer does is > make this hole 2-7/8" > in other words the prop now remains about 1/8" from > the cowling. You can > make a prop with a centre hole as deep or shallow as > needed, > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > Post photos, introductions, and For Sale items to > http://www.kr2forum.com/phpBB2/index.php > please see other KRnet info at > http://www.krnet.org/info.html > ____________________________________________________________________________ ________ Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. http://tools.search.yahoo.com/toolbar/features/mail/ _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net Post photos, introductions, and For Sale items to http://www.kr2forum.com/phpBB2/index.php please see other KRnet info at http://www.krnet.org/info.html
