The washer is not the same diameter as the hub? If so, I would not fly it personally.
I have used .025, .040 and .080 washers in the past on both sides of the prop to get things to space our correctly, but they are always 5" diameter (same as the hub). Jeff On 2/20/07, wcraw...@cmhc-schl.gc.ca <wcraw...@cmhc-schl.gc.ca> wrote: > I found my Sterba prop was rubbing slightly against my cowling, since I > wanted to touch up the scratches from that I removed the prop (have a 5" > extension) and I placed a 2ΒΌ dia washer about 1/8" thick inside the prop > bored hole, exact fit. This should allow me to project the prop out just > enough to clear the cowling. my question is, do you think with the washer > should play no danger? > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > Post photos, introductions, and For Sale items to <A > HREF=http://www.kr2forum.com/phpBB2/index.php > please see other KRnet info at http://www.krnet.org/info.html >
