I can't find it in the manual either, but mine (elevator) are 3" from center Now, I can find in the manual where it tells you to position your cables at 2.5" either side of center. I can tell you that if the elevator is 3", this will not work. It was this way on mine when I was switching to dual stick and I noticed that the cables will not operate properly, so I made the one at the stick end ( I have a push pull tube through the spar) 3" also, and they operate properly that way. I also cannot find the rudder measurements in the manual.
Your results will vary. See N64KR at http://KRBuilder.org - Then click on the pics See you at the 2007 - KR Gathering There is a time for building and a time for FLYING and the time for Flying has begun. Daniel R. Heath - Lexington, SC -------Original Message------- I am trying to fabricate my elevator and rudder control horns but can't figure out how long to make them! My manual doesn't give the size or distance from center out to the hole.
