Thanks to all who replied I have found a place close to home to buy the Last-A-Foam the factory is not to far from me. Probably 75 or 80 miles away. Now for the other question would a higher density foam be better or should I stick with the 2 lb. stuff ? ----- Original Message ----- From: "Mark Jones" <mjo...@muellersales.com> To: "KRnet" <kr...@mylist.net> Sent: Monday, December 18, 2006 2:11 PM Subject: RE: KR> 2lb. Foam
> Wick's and AS&S is polyurethane and is very easy to sand and shape. The > home insulation board is polystyrene and much harder to sand and shape. > Buy the foam from Wick's or AS&S. > > Mark Jones (N886MJ) > Wales, WI > My Web site: http://www.flykr2s.com/ > Mailto:flyk...@wi.rr.com > > > -----Original Message----- > From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On > Behalf Of Eric Kelsheimer > Sent: Monday, December 18, 2006 12:47 PM > To: KRnet > Subject: KR> 2lb. Foam > > > I have a question for the list, what is the difference in the 2lb. > foam you can buy from wicks or Aircraft Spruce and the stuff you can buy > from the lumber company ? Thanks for your reply > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
