Message: 13
List-Post: krnet@list.krnet.org
Date: Wed, 1 Nov 2006 22:57:05 EST
From: bdazzca...@aol.com
Subject: KR> covering
To: kr...@mylist.net
Message-ID: <307.7c07423b.327ac...@aol.com>
Content-Type: text/plain; charset="US-ASCII"
HI Netters,
I was curious what is the best way to wrap a fuseluage in fiberglass?
A 45degree angle or from side to side or lengthwise? I noticed Edwaurdo
from
Chile did the inside of his side to side but noe sure about outside. And
how
many layers of 5.4oz should I use?
David Swanson
bdazzca...@aol.com
To save a little weight I used 1.2 oz. Dacron fabric over the bare wood. I
tacked it around the edges and tightened it up with a close iron. Then I
brushed on some stits pollybrush, about a couple of coats. I applied glass
to the upper rear deck and just primed and painted over it. It holds up
fine.
-Joe
