Robin, et al Although it is on Mark's site somewhere (I originally got it from there) and in the archives, there is a quick and dirty look at a flap set-up using the KR design torque tube and the flaps Mark L mentions and uses on his KR. The W.A.R. Corsair that I was into a couple of years ago had this and, until I had to let it go, looked and worked smoothly on the ground (not flying!) The site FLAPS FOR YOUR WARBIRD (near page bottom) is: http://warbuddies.homestead.com/constructiontips.html Gary
-----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Robin Macdonald Sent: August 22, 2006 7:40 PM To: KRnet Subject: KR> Flaps/tubes tec. Netheads, I am interested in all the information about flaps/connection to tubes etc. Has anyone any idea what the touque is on the tube when the flaps are lowered. This would give anyone an idea of what size tube to use, what size of flanges connections etc & what power is needed in the actuator. Also once the system was finished you could test load to a required torque. Regards Robin r.macdon...@clear.net.nz _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
