I don't remember if yours is in the panel now or not, but if it is I would almost bet that a vew one in the same spot will do the same thing. If it is next to the turn coordinator or other magnetic material that will throw it off pretty far. Remove it from the panel and hold it a foot above and you may be surprised how much of a difference there is. I had the same problem on the KR and the Stang.
Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Dan Heath Sent: Saturday, July 15, 2006 5:08 PM To: kr...@mylist.net Subject: KR> Compass I just figured out that my compass will not adjust. It is an old, very old, airpath that was rebuilt. It say W when it should say N and adjusting the screws does not move it much. So, I need to replace it and want to mount it in the panel, because I don't have any other place to put it. Does anyone have one they want to sell, or have suggestions on what to buy I am not holding up my first flight because of this, as I will have the airport in sight, but do want to start looking into it now. See N64KR at http://KRBuilder.org - Then click on the pics See you in Mt. Vernon - 2006 - KR Gathering There is a time for building and a time for FLYING and the time for building is OVER. Daniel R. Heath - Lexington, SC _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
